
The AirTAC SEJ Adjustable Cylinder SEJ63X30-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X30-30 is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. The back-rod stop screw lets you dial the retract end down to zero, yielding an effective stroke range of 0-30 mm for precise mechanical positioning.
This extruded aluminum barrel unit features field-adjustable air cushions at both ends to manage deceleration over the 36 mm cushion length. It operates at 30-800 mm/s with a PT3/8 port and a Ø20 mm rod. This SKU has no magnet, so it lacks position sensing, but the rear rod resists rotation and can carry an external cam.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X30-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 30 mm (0–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 0-30 mm stroke to match varying die heights during press setup, utilizing the 1402 N both-way force to shuttle heavy tooling securely.
Adjust the retract position on the fly to handle different carton lengths on a packaging line, using the equal push and pull force to maintain precise stopping control.
Fine-tune the end-of-stroke position during initial machine commissioning, locking the back-rod stop screw once the exact 0-30 mm travel is achieved.
The 30 mm adjustment window is ideal for machine commissioning, allowing you to fine-tune the end position without swapping hardware. If you need less force, the next bore down is 50 mm, which provides 825 N both ways at 0.5 MPa. If your application requires more thrust, stepping up to the 80 mm bore yields 2268 N at 0.5 MPa.
For fixed-position tasks where dialing in the stroke is unnecessary, a standard SED double-rod cylinder is sufficient. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
The retract stroke can be dialed down by up to 30 mm via the back-rod stop screw, giving an effective stroke range of 0-30 mm. You set the exact end position on the machine and lock it in.
Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.