verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X40-10S

The AirTAC SEJ Adjustable Cylinder SEJ63X40-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 30–40mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke40 mm
  • Adjust window10 mm
  • Effective stroke30–40 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$109.30 $116.80Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X40-10S

The AirTAC SEJ63X40-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annular areas so output force is equal in both directions. You get 1402 N of thrust and pull at 0.5 MPa, and 1962 N at 0.7 MPa.

The -10 tail defines a 10 mm adjustable stroke window, letting you dial the retract end from 30 mm up to 40 mm. A stop screw on the back rod sets this exact range, which you lock in place during machine commissioning. It carries a magnet for CMSE reed or DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ63X40-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X40-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke40 mm
Adjustment window10 mm (30–40 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X40-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×40Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X40-10S Is Used

precision_manufacturing

Press Tonnage Setup

Dial in the exact 30-40 mm approach on a small pneumatic press, matching material thickness precisely while applying 1402 N of equal both-way clamping force.

swap_horiz

Packaging Changeover

Adjust the retract stop on the fly when switching carton sizes, using the 10 mm window to tune the folding flap position without swapping hardware.

tune

Dispenser Calibration

Fine-tune the retract distance on an adhesive dispenser to perfect the bead start point, relying on the equal push/pull force for consistent fluid metering.

Is the Airtac SEJ Adjustable Cylinder SEJ63X40-10S the Right Cylinder?

Confirm this 10 mm adjustment window covers your required end-position range. If 1402 N at 0.5 MPa is too much, step down to the 50 mm bore (825 N both ways); if you need more push, step up to the 80 mm bore (2268 N). If you never need to fine-tune the stop position, a fixed-stroke SED cylinder is sufficient.

This standard ISO 15552 unit swaps directly on bore, stroke, and port (PT3/8). Remember it does not hold position on air loss—the adjustable cushion only decelerates near stroke end, so use a BSED or external rod lock for fail-safe holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X40-10S FAQ

The -10 designation means the retract stroke is mechanically adjustable over a 10 mm window. You can dial the effective stroke from 30 mm up to the nominal 40 mm by turning the stop screw on the back rod, then locking it.

Because the rod exits both ends, force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X40-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X40-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.