
The AirTAC SE63 Standard Cylinder SE63X40 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 40mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X40 is a double-acting single-rod ISO 15552 profile cylinder delivering 1559 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, creating a compact, corrosion-resistant body that mounts flush in tight machine envelopes. The PT3/8 port and M16x1.5 rod thread handle robust pneumatic flow for rapid cycling.
Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration via a set screw, softening hard impacts when operating at speeds up to 800 mm/s. This specific SKU lacks the built-in magnet, so it does not support CMSE or DMSE position sensing without modification, but it retains the standardized ISO 15552 footprint for seamless retrofitting.
| Model | Airtac SE63 Standard Cylinder SE63X40 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push force at 0.5 MPa to secure injection mold halves during material injection, utilizing the 40 mm stroke for rapid, high-cycle clamping.
Actuates a routing arm on a packaging line, using the extruded profile barrel for flush mounting and the adjustable cushion to stop the 40 mm stroke smoothly without bounce.
Drives small bronze bushings into machined housings on an assembly line, relying on the 2182 N push force at 0.7 MPa to seat components precisely.
At 0.5 MPa, this 63 mm bore generates 1559 N push and 1402 N pull. If your application requires less force, step down to the 50 mm bore offering 982 N push; if you need more clamping power, step up to the 80 mm bore providing 2513 N push. To match an existing ISO 15552 layout, verify the 40 mm stroke, PT3/8 port, and basic mounting interface. Because this unit has no -S magnet, add an external sensor bracket if you need position feedback. Note that a plain SE does not hold its load when air is lost; for position holding, consider a BSE rod lock variant.
Quick checklist
The SE63X40 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s.
Yes, the SE63X40 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.