
The AirTAC SEJ Adjustable Cylinder SEJ63X40-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 20–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X40-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 1402 N (0.5 MPa) and 1962 N (0.7 MPa). The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise end-position detection.
This 63 mm bore unit features a 20 mm adjustment window, letting you mechanically dial the retract stroke down from 40 mm to a 20 mm minimum via a back-rod stop screw. Once the exact machine end-position is set, you lock the screw in place. It carries a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and field-adjustable air cushions at both ends to tame deceleration.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X40-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 20 mm (20–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the exact 20-40 mm clamping depth on a light assembly press, leveraging the 1962 N both-way force at 0.7 MPa to ensure consistent part seating.
Quickly reposition the retract stop on a packaging line when switching to different carton heights, using the 20 mm adjustment window to match the new format without swapping hardware.
Fine-tune the open position of a 286 kgf rated gripper actuator during machine setup, testing various retracted clearances before locking the back-rod stop screw.
Confirm this 20 mm adjustment window covers your required end-position range, effectively spanning 20-40 mm. If you need less force, the 50 mm bore neighbor provides 825 N at 0.5 MPa both ways; if your load demands more, step up to the 80 mm bore for 2268 N at 0.5 MPa. If your application never requires stroke changes after commissioning, a fixed-stroke SED cylinder offers a simpler setup. For any stroke at or above 300 mm, external guides are recommended to prevent side-load wear.
When matching an ISO 15552 replacement, verify the 63 mm bore, 40 mm nominal stroke, 20 mm adjustment window, PT3/8 port, and your specific mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that the adjustable air cushion only decelerates the load near stroke end; it is not a mechanical brake. A plain SEJ will not hold position on air loss, so for fail-safe holding, consider an external rod lock or a BSED series cylinder.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 20 mm window. You can dial the effective stroke anywhere from 20 mm up to the nominal 40 mm, then lock the screw at your exact end-position.
Because a rod exits both ends, the force is identical in both directions. This 63 mm bore cylinder delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.