
The AirTAC SEJ Adjustable Cylinder SEJ63X400-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 300–400mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X400-100 is a double-acting, double-rod ISO 15552 profile cylinder engineered for exact stroke dialing. A rod exits both ends, yielding identical annulus areas, so thrust is equal in both directions at 1402 N each way at 0.5 MPa. A mechanical stop screw on the back rod lets you dial the retract end over a 100 mm window, setting an effective stroke range of 300 to 400 mm without changing hardware.
This extruded aluminum ISO 15552 cylinder features field-adjustable air cushions at both ends to fine-tune end-of-stroke deceleration. It runs at 30-800 mm/s, uses a PT3/8 port, and carries a Ø20 mm rod with an M16x1.5 thread. This specific SKU lacks a magnet, so it will not support CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X400-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 400 mm |
| Adjustment window | 100 mm (300–400 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to perfectly match material thickness stops, utilizing the 1962 N both-way force to position the back-gauge precisely over a 300-400 mm travel range.
Adjust the end position on the fly when switching carton sizes, using the equal both-way thrust to push and pull the folding mechanism without speed variation.
Fine-tune the actuation endpoint during commissioning to deflect varying product sizes on a conveyor line, locking the back-rod stop screw once the mechanical end is set.
If your application requires less force, the 50 mm bore provides 825 N at 0.5 MPa both ways; if you need more, step up to the 80 mm bore for 2268 N at 0.5 MPa. The 100 mm adjustment window is ideal for commissioning fine-tune or matching variable stops across a 300-400 mm range.
If your end position never varies, a fixed-stroke SED cylinder is sufficient. For stroke lengths of 400 mm, external guides are recommended to manage side loads and prevent rod binding. The adjustable cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches the 100 mm window, PT3/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The retract end features a mechanical stop screw on the back rod that allows you to dial the stroke over a 100 mm window. This sets the effective stroke range from 300 mm up to the nominal 400 mm, which is ideal for fine-tuning end positions on the machine.
Because the rod exits both ends, the annulus area is identical in both directions. The output force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.