verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X400-100S

The AirTAC SEJ Adjustable Cylinder SEJ63X400-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 300–400mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke400 mm
  • Adjust window100 mm
  • Effective stroke300–400 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$175.63 $183.13Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X400-100S

The AirTAC SEJ63X400-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so output force is equal in both directions at 1402 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end anywhere from 300mm to 400mm to perfectly match a mechanical stop.

This extruded aluminum barrel unit includes a magnet for position sensing and adjustable air cushions at both ends.

Airtac SEJ Adjustable Cylinder SEJ63X400-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X400-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke400 mm
Adjustment window100 mm (300–400 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X400-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×400Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X400-100S Is Used

precision_manufacturing

Press Tonnage Calibration

Dial the 100mm retract window to lower a 1962 N (at 0.7 MPa) press head precisely onto load cells, finding the exact 300-400mm deformation point without swapping hardware.

swap_horiz

Packaging Format Changeover

Adjust the double-rod end stop on the fly when a packaging line switches carton sizes, using the equal both-way force to positively push and retract the forming plow.

settings

Robotic Gripper Alignment

Fine-tune the 400mm stroke end during machine commissioning to set a gripper's exact open position, locking the back-rod screw once the optimal reach is found.

Is the Airtac SEJ Adjustable Cylinder SEJ63X400-100S the Right Cylinder?

This 63mm bore provides 1402 N both ways at 0.5 MPa. If you need less force, step down to the 50mm bore (825 N both ways); if your load is heavier, step up to the 80mm bore (2268 N both ways). Because the 400mm stroke is over 300mm, add external guides to manage side loads and prevent rod binding.

The 100mm window is ideal for commissioning fine-tune or changeover to different part heights. If you never need to alter the end position, a fixed-stroke SED saves space. Remember that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use a BSED or an external rod lock. This unit is dimensionally interchangeable per ISO 15552 with a PT3/8 port and M16x1.5 rod thread.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X400-100S FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 100mm. The effective stroke range is 300mm to 400mm. You dial in the exact end position for your machine, then lock the screw.

Because the rod exits both ends, the annular area is identical in both directions. It delivers 1402 N each way at 0.5 MPa, 1962 N each way at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X400-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X400-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.