verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X400-10S

The AirTAC SEJ Adjustable Cylinder SEJ63X400-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 390–400mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke400 mm
  • Adjust window10 mm
  • Effective stroke390–400 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$175.63 $183.13Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X400-10S

The AirTAC SEJ63X400-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force stays perfectly balanced at 1402 N each way at 0.5 MPa. You can dial the retract end from 390 mm up to the nominal 400 mm.

A stop screw on the back rod mechanically sets this end position, which you lock down after fine-tuning. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback. Because the stroke is 400 mm, external guides are recommended to manage side loading on the extended rod.

Airtac SEJ Adjustable Cylinder SEJ63X400-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X400-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke400 mm
Adjustment window10 mm (390–400 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X400-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×400Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X400-10S Is Used

precision_manufacturing

Pallet Changeover Stops

Dial the 10 mm retract window to match varying pallet heights.

tune

Press Feed Calibration

Fine-tune the 390-400 mm end position during commissioning to align strip feed. The double-rod design ensures symmetrical speed and force both ways.

straighten

Long-Stroke Gripper Actuation

Move packaging flaps over a 400 mm reach. The Ø20 mm rod and adjustable cushions manage the extended mass, while the -S magnet tracks travel.

Is the Airtac SEJ Adjustable Cylinder SEJ63X400-10S the Right Cylinder?

Confirm this 10 mm adjustment window covers your exact end-position tolerance for commissioning. If you need less force, stepping down to the 50 mm bore provides 825 N at 0.5 MPa both ways; stepping up to the 80 mm bore yields 2268 N. If you do not need on-machine stroke adjustability, a fixed-stroke SED handles the same load.

This cylinder is dimensionally interchangeable per ISO 15552 for direct replacement matching the 63 mm bore, 400 mm stroke, PT3/8 port, and magnet option. Note that the adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; fail-safe holding requires an external rod lock.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X400-10S FAQ

A stop screw on the rear rod lets you mechanically dial the retract end position within a 10 mm window, giving an effective stroke range of 390 to 400 mm. You lock the screw after setting the exact end position.

Because it is a double-rod cylinder, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X400-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X400-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.