
The AirTAC SEJ Adjustable Cylinder SEJ63X50-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X50-10 is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust matches in both directions at 1402 N each way at 0.5 MPa. You can dial the retract end up to 10 mm, giving an effective 40-50 mm stroke range for precise machine commissioning.
It runs on a PT3/8 port with a Ø20 mm rod and M16x1.5 thread. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end. This unit lacks a magnet, so it carries no position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X50-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 10 mm (40–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 40-50 mm retraction to set precise die clearance during stamping press changeovers, using the 1962 N both-way force to pull the tooling.
Adjust the retract stop on the fly to match varying carton depths on a packaging conveyor, ensuring crisp folds without reprogramming the machine.
Fine-tune the end position to seat electronic components precisely, using the equal both-way thrust to avoid uneven insertion depth.
This 10 mm adjustment window is ideal for fine-tuning a short end position on the machine. If you need a wider range, step up to a larger adjust suffix. For force sizing, the adjacent bores are 50 mm down and 80 mm up. The 50 mm bore yields 825 N both ways at 0.5 MPa, while the 80 mm bore provides 2268 N both ways at 0.5 MPa.
If your stroke is fixed and never changes, a standard SED double-rod cylinder is enough. Remember that the adjustable air cushion and mechanical stop screw only set the end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
The retract end features a stop screw on the back rod that allows you to shorten the nominal 50 mm stroke by up to 10 mm. This gives an effective stroke range of 40-50 mm. You lock the screw after setting the exact end position.
Because the rod exits both ends, the force is identical in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.