
The AirTAC SEJ Adjustable Cylinder SEJ63X50-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X50-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 30-50mm for exact machine commissioning. Because a rod exits both ends, the annulus area is symmetrical, delivering equal force in both directions at about 1402 N each way at 0.5 MPa.
This 63mm bore unit runs on a PT3/8 port and uses a Ø20mm rod with an M16x1.5 thread. It features field-adjustable air cushions at both ends to manage deceleration over its 36mm cushion length. Note this SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X50-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20mm retract window to set exact 1402N @0.5MPa press depth for bearing inserts, locking the stop screw once the perfect end position is found.
Adjust the 30-50mm effective stroke on the fly to accommodate different box heights without swapping hardware, utilizing the equal both-way force for reliable flap folding.
Fine-tune the mechanical end stop during assembly machine trials to precisely seat delicate parts, relying on the 36mm adjustable air cushion for smooth deceleration.
Verify the 20mm adjustment window covers your required end-position variance. If you need less force, stepping down to the 50mm bore yields 825 N at 0.5 MPa; if you need more, stepping up to the 80mm bore provides 2268 N. If your stroke never changes after commissioning, a fixed-stroke SED saves length and complexity.
For ISO 15552 replacements, match the 50mm stroke, 20mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember the adjustable cushion only decelerates near stroke end; it is not a mechanical lock. For fail-safe position holding on air loss, specify a BSED or an external rod lock.
Quick checklist
The rear stop screw provides a 20mm adjustment window. The effective retract stroke can be dialed from 30mm up to the nominal 50mm, allowing you to fine-tune the end position directly on the machine without changing cylinder hardware.
Because the rod exits both ends, force is identical in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.