verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X50-20S

The AirTAC SEJ Adjustable Cylinder SEJ63X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke50 mm
  • Adjust window20 mm
  • Effective stroke30–50 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$109.30 $116.80Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X50-20S

The AirTAC SEJ63X50-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable stroke mechanism. A rod exits both ends, meaning the annular area is identical in both directions, yielding an equal force of 1402 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a stop screw on the back rod over a 20 mm window, providing an effective stroke range of 30-50 mm for precise end-position tuning.

This extruded aluminum barrel unit includes a magnet for CMSE reed and DMSE electronic sensors. It features field-adjustable air cushions at both ends (36 mm cushion length) to decelerate the load near the stroke end, and a PT3/8 port. The back rod can also carry a cam or flag, though the overall length is longer than a single-rod SE cylinder.

Airtac SEJ Adjustable Cylinder SEJ63X50-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X50-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke50 mm
Adjustment window20 mm (30–50 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X50-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×50Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X50-20S Is Used

precision_manufacturing

Packaging Stop Dial-In

Delivering 1402 N both ways at 0.5 MPa, this cylinder dials the retract stop from 30 to 50 mm to perfectly time the mechanical end-stroke for packaging flap folders during commissioning.

swap_horiz

Part Height Changeover

Use the 20 mm back-rod adjustment window to quickly reconfigure a 63 mm bore clamping position for varying product heights on a conveyor without swapping out the entire actuator hardware.

tune

Trial Positioning Stops

The equal both-way force and adjustable end-position let operators fine-tune trial stops on a testing fixture, locking the back-rod screw precisely when the 30-50 mm effective stroke hits the target.

Is the Airtac SEJ Adjustable Cylinder SEJ63X50-20S the Right Cylinder?

Confirm the 20 mm adjustment window covers your required end-position variance, allowing you to dial in the retract from 30 to 50 mm without changing hardware. If you need less force, the 50 mm bore provides 825 N each way at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. A fixed-stroke SED is sufficient if you do not need on-machine stroke variability. Remember, a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate the load, so point to a BSED or external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 63 mm bore, 50 mm stroke, PT3/8 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X50-20S FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke over a 20 mm window. The effective stroke range is 30-50 mm, which you dial in and lock at the exact position needed for your machine.

As a double-rod cylinder, force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, with a maximum of 286 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 and uses a PT3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X50-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X50-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.