
The AirTAC SEJ Adjustable Cylinder SEJ63X50-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X50-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions for an equal drive force of 1402 N each way at 0.5 MPa. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for precise end-of-travel detection.
You can dial the retract end up to 40 mm via a back-rod stop screw, yielding an effective stroke range of 10 to 50 mm. This mechanism lets you fine-tune the mechanical end position directly on the machine without swapping hardware. It uses a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and incorporates field-adjustable air cushions at both ends to manage deceleration.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X50-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm stop screw to match varying die heights during press tool changeover, using the 1962 N both-way force to consistently shift heavy slider assemblies.
Fine-tune the 10-50 mm effective stroke on a CNC tube bender to set precise material contact points, relying on the equal double-rod force for stable clamping.
Commission an assembly line clamp by adjusting the retract end to hit a specific sensor target, preventing overtravel on delicate components without changing the cylinder body.
This 63 mm bore model delivers 1962 N at 0.7 MPa both ways. If your application needs less force, the 50 mm bore offers 1154 N at 0.7 MPa; for heavier demands, the 80 mm bore provides 3175 N at 0.7 MPa. The 40 mm adjustment window is ideal for commissioning a variable stop or matching a precise 10-50 mm end position. If your stroke is fixed and never changes, a standard SED double-rod cylinder is sufficient. Remember that the adjustable air cushion only decelerates the load near stroke end; it is not a mechanical lock. For fail-safe position holding on air loss, use an external rod lock or a BSED series cylinder. This unit is dimensionally interchangeable per ISO 15552—match the 50 mm stroke, 40 mm window, PT3/8 port, and magnet option for a direct replacement.
Quick checklist
The 40 mm adjustment window allows you to dial the retract stroke from a minimum effective stroke of 10 mm up to the nominal 50 mm. You set the mechanical end position via the back-rod stop screw and lock it in place.
Because a rod exits both ends, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.