
The AirTAC SEJ Adjustable Cylinder SEJ63X50-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 0–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X50-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustment window. A rod exits both ends, yielding identical annulus areas and an equal drive force of 1402 N each way at 0.5 MPa. The effective stroke dials from 0 up to 50 mm.
You set the retract end-position via a stop screw on the back rod, then lock it in place—perfect for dialing in a precise end-point on the machine without swapping hardware. This unit includes a magnet for CMSE reed and DMSE electronic sensors, uses a PT3/8 port, and runs at 30-800 mm/s.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X50-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 50 mm (0–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 0-50 mm retract window to fine-tune the stop position on a coil feed line, using the 1402 N both-way force to consistently push the material guide.
Quickly adjust the end-of-stroke cam for different carton heights on a packaging machine, locking the back-rod stop screw precisely for each product run.
Set trial positions during robotic assembly cell commissioning, tweaking the 50 mm window to find the exact pressing depth before finalizing the mechanical setup.
Confirm the 50 mm window covers your required positioning range. If you need less on-the-fly adjustment, step down to the 32 mm bore (345 N both ways at 0.5 MPa); if you need more push, step up to the 80 mm bore (2268 N both ways at 0.5 MPa). For fixed-stroke jobs without positioning needs, a standard SED is enough.
When replacing an ISO 15552 cylinder, match the 63 mm bore, 50 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note: the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The 50 mm adjustment window lets you dial the retract stroke from 0 up to 50 mm. You set the mechanical end-position using a stop screw on the back rod, then lock it after finding the exact spot.
Because the rod exits both ends, the force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.