verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X500-10S

The AirTAC SEJ Adjustable Cylinder SEJ63X500-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 490–500mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke500 mm
  • Adjust window10 mm
  • Effective stroke490–500 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$194.71 $202.21Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X500-10S

The AirTAC SEJ63X500-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas and an equal force of 1402 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 10 mm window, giving an effective stroke range of 490-500 mm.

This extruded-aluminum ISO 15552 cylinder features field-adjustable air cushions at both ends and a built-in magnet (-S) for CMSE reed or DMSE electronic sensors. With a 500 mm stroke, the dual rods provide inherent symmetry and resist rotation, though external guide rails should support side loads over this length.

Airtac SEJ Adjustable Cylinder SEJ63X500-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X500-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke500 mm
Adjustment window10 mm (490–500 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X500-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×500Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X500-10S Is Used

precision_manufacturing

CNC Lathe Chucking

Dial in the 10 mm retract window to set precise part ejection distances against the spindle, using the 1402 N both-way force to consistently push bar stock.

conveyor_belt

Pallet Divertor Arm

Fine-tune the actuation end-stop to match varying pallet widths on a packaging line, leveraging the equal push/pull force for reliable dual-direction routing.

science

Lab Sample Tray Indexer

Adjust the 490-500 mm stroke end-point to hit exact analytical sensor focal lengths, using the symmetric double-rod to prevent tray twist over the long travel.

Is the Airtac SEJ Adjustable Cylinder SEJ63X500-10S the Right Cylinder?

This 10 mm adjustment window is ideal for fine-tuning a precise end position during commissioning without swapping hardware. If you need a wider adjustment range, consider the SEJ63X500-20. For force sizing: stepping down to a 50 mm bore yields 825 N both ways at 0.5 MPa, while stepping up to an 80 mm bore provides 2268 N at 0.5 MPa.

If the end position is fixed and never changes, a standard SED double-rod cylinder is sufficient. For fail-safe load holding on air loss, note that the SEJ stop screw and air cushions decelerate motion but do not lock the rod; use an external rod lock or BSED series. When replacing an ISO 15552 unit, match the 63 mm bore, 500 mm stroke, PT3/8 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X500-10S FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke over a 10 mm window, providing an effective stroke range of 490-500 mm. You dial it in during commissioning and lock it after setting the exact end position.

Because it is a double-rod cylinder, the force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X500-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X500-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.