
The AirTAC SEJ Adjustable Cylinder SEJ63X600-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 580–600mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X600-20S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 1402 N each way at 0.5 MPa. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for exact end-of-trroke detection.
This unit features a 20mm adjustable stroke window via a back-rod stop screw, allowing you to dial the retract end from 580mm to 600mm. You can fine-tune the mechanical end position directly on the machine and lock it. It includes field-adjustable air cushions at both ends and a PT3/8 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X600-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 600 mm |
| Adjustment window | 20 mm (580–600 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 580-600mm clamping depth on a hydraulic press fixture, using the 1962 N retract force to secure varying material thicknesses.
Adjust the retract stop on packaging conveyor diverters to handle different carton lengths without reprogramming the 1402 N actuation force.
Fine-tune the gripper jaw opening during commissioning, locking the back-rod stop screw once the optimal pick position is reached.
The 20mm adjustment window lets you perfectly match variable stop positions or fine-tune a 580-600mm end point without swapping hardware. Stepping down, the 50mm bore provides 825 N at 0.5 MPa, while stepping up to the 80mm bore yields 2268 N at 0.5 MPa both ways. If your application never requires end-position tweaking, a fixed-stroke SED cylinder is sufficient.
For a direct ISO 15552 replacement, match the 63mm bore, 600mm stroke, 20mm window, PT3/8 port, and magnet. Because the stroke is 600mm, external guide rails are recommended to prevent rod side-loading and premature seal wear. Note: the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; use a BSED or external rod lock for fail-safe holding.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 20mm window. The effective stroke range is 580mm to 600mm, which you set and lock during machine commissioning.
Because it is a double-rod cylinder, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.