verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X600-50S

The AirTAC SEJ Adjustable Cylinder SEJ63X600-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 550–600mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke600 mm
  • Adjust window50 mm
  • Effective stroke550–600 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$215.39 $222.89Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X600-50S

The AirTAC SEJ63X600-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rod exits both ends, yielding an equal force of 1402 N each way at 0.5 MPa. You can dial the retract end from 550mm to 600mm to perfectly match a machine stop.

Because the piston has a rod on both sides, the annulus area is identical in both directions, ensuring equal thrust and speed. The -S magnet enables position detection with CMSE reed or DMSE electronic sensors. A stop screw on the back rod sets the mechanical end, which you lock down after fine-tuning during commissioning.

Airtac SEJ Adjustable Cylinder SEJ63X600-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X600-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke600 mm
Adjustment window50 mm (550–600 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X600-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×600Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X600-50S Is Used

precision_manufacturing

Packaging Press Changeover

Dial in the 550-600mm retract stroke to switch between packaging flap heights, using the 1402N both-way force to press cartons securely.

straighten

Conveyor Stop Alignment

Fine-tune the mechanical stop position on a sorting line during commissioning, locking the back-rod screw precisely where the product halts.

science

Test Fixture Positioning

Adjust the end point on the fly for different component lengths during laboratory trials, relying on the equal bidirectional thrust for consistent test pressure.

Is the Airtac SEJ Adjustable Cylinder SEJ63X600-50S the Right Cylinder?

This 63mm bore delivers 1962 N at 0.7 MPa both ways. If you need less force, step down to the 50mm bore providing 1154 N; for heavier loads, step up to the 80mm bore offering 3175 N. A fixed-stroke SED is sufficient if your end position never varies.

The 50mm adjustment window lets you fine-tune the retract position on the machine without swapping hardware. Since the 600mm stroke exceeds 300mm, use external guides to prevent side-load wear on the rod. The adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches this bore, 600mm stroke, 50mm window, PT3/8 port, and magnet.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X600-50S FAQ

The 50mm window lets you dial the retract stroke from 550mm up to 600mm. You set the exact end position using a stop screw on the back rod, then lock it in place.

Force is equal in both directions due to the double rod. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X600-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X600-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.