
The AirTAC SEJ Adjustable Cylinder SEJ63X70-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 30–70mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X70-40S is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A stop screw on the back rod lets you dial the retract end up to 40 mm, yielding an effective stroke range of 30-70 mm without swapping hardware.
This 63 mm bore unit features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and adjustable air cushions at both ends to manage deceleration over its 36 mm cushion length. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability with no external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X70-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 70 mm |
| Adjustment window | 40 mm (30–70 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm window to set a precise lower dead-center on a 1962 N press stroke, matching material thickness variations without re-mounting hardware.
Adjust the retract end from 30 to 70 mm to accommodate different carton heights on a packaging line, using the equal both-way force for stable retraction.
Fine-tune the jaw opening during machine commissioning, locking the back-rod stop screw once the exact 1402 N gripping position is achieved.
Confirm this 40 mm adjustment window covers your required positioning range. If you need less force, the neighboring 50 mm bore provides 825 N at 0.5 MPa; if you need more, stepping up to the 80 mm bore yields 2268 N both ways. If the exact end position never changes after commissioning, a fixed-stroke SED cylinder is sufficient. For variable-stop applications, this SEJ excels. Note that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the 63 mm bore, 30-70 mm effective stroke, PT3/8 port, and magnet option.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. For this model, you can adjust the retract end up to 40 mm, giving an effective stroke range of 30-70 mm. You lock the screw after setting your desired end position.
Because it is a double-rod cylinder, force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.