verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X80-40

The AirTAC SEJ Adjustable Cylinder SEJ63X80-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke80 mm
  • Adjust window40 mm
  • Effective stroke40–80 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$112.81 $120.31Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X80-40

The AirTAC SEJ63X80-40 is a double-acting, double-rod ISO 15552 profile cylinder with a 40 mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions at 1402 N (0.5 MPa). By turning the stop screw on the rear rod, you dial the retract end down, giving an effective stroke range of 40-80 mm.

This unit features a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and 36 mm adjustable air cushions at both ends. The extruded aluminum barrel has no external tie rods. Since this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ63X80-40 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X80-40
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke80 mm
Adjustment window40 mm (40–80 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X80-40

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×80Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X80-40 Is Used

precision_manufacturing

Tooling Changeover

Dial the 40 mm retract window to match varying part heights during CNC machining changeovers, using the 1402 N both-way force to push and pull fixtures.

tune

Press Stroke Calibration

Fine-tune the exact bottoming position of a light assembly press within the 40-80 mm effective range, locking the rear stop screw once the depth is set.

swap_horiz

Variable Stop Diverter

Adjust the retract distance on the fly for a conveyor diverter gate handling different package sizes, relying on the equal double-rod force for smooth retraction.

Is the Airtac SEJ Adjustable Cylinder SEJ63X80-40 the Right Cylinder?

Verify the 40 mm adjustment window covers your positioning range. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. If your end position is fixed and never changes, a standard SED double-rod cylinder is sufficient.

Remember that the adjustable cushion and stop screw decelerate the load near the end of travel but do not hold position on air loss. For fail-safe holding, use an external rod lock. Because the stroke is under 300 mm, side-load stress is minimal, but ensure the M16x1.5 rod threads align cleanly with your fixture to avoid binding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X80-40 FAQ

The rear stop screw allows you to shorten the retract stroke by up to 40 mm. For an 80 mm nominal stroke, the effective stroke range is 40-80 mm. You lock the screw after setting the exact end position.

Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. The maximum force is 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X80-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X80-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.