
The AirTAC SE63 Standard Cylinder SE63X80 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X80 is a double-acting, single-rod ISO 15552 profile cylinder delivering 1559 N of push force and 1402 N of pull force at 0.5 MPa. Engineered to VDMA 24562 standards, it provides a robust and standardized footprint for modern pneumatic machinery.
This unit features a square extruded aluminum barrel without external tie rods, which keeps the body compact and resistant to corrosion while allowing accessories to mount flush. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for fast-moving loads. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SE63 Standard Cylinder SE63X80 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa required to positively divert heavy pallets on high-speed packaging conveyors.
Uses the 80 mm stroke to fold corrugated carton flaps precisely before tape sealing, benefiting from the adjustable cushioning.
Positions sheet metal backstops accurately in press brakes, leveraging the rigid extruded profile for repeatability.
With an 80 mm stroke and 1559 N push at 0.5 MPa, this 63 mm bore fits mid-range actuation tasks perfectly. If your application requires less force, the 50 mm bore offers 982 N push, whereas stepping up to the 80 mm bore provides 2513 N push for heavier mechanisms. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; use a BSE rod lock for strict position-holding requirements.
As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standard mounting hardware like FA front flanges or TC trunnion joints. It uses a PT3/8 port and an M16x1.5 rod thread. Since the stroke is under 300 mm, side-load stress on the rod bearing is minimal, though external guides are always recommended for heavy off-center loads.
Quick checklist
At 0.5 MPa, the SE63X80 delivers 1559 N push and 1402 N pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates safely between 0.15 and 1.0 MPa, with a speed range of 30-800 mm/s.
Yes. The SE63X80 is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting dimensions and port locations are fully interchangeable with other ISO 15552 profile cylinders. It uses a PT3/8 port and an M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.