
The AirTAC SEJ Adjustable Cylinder SEJ63X80-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 30–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X80-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm retract adjustment window. You can dial the mechanical stop down to an effective stroke range of 30-80mm, perfect for hitting a precise end position during machine commissioning without swapping hardware.
This 63mm bore unit uses a PT3/8 port and a Ø20mm rod with an M16x1.5 thread. It includes field-adjustable air cushions at both ends to manage deceleration over its 36mm cushion length. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel keeps a clean profile free of external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X80-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 50 mm (30–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30-80mm clamping depth on a stamping press die during trial runs, leveraging the 1962 N both-way force at 0.7 MPa to seat materials firmly.
Adjust the retract stop to match varying box sizes on a packaging line, using the equal push and pull forces to positively shift a flighted conveyor lug.
Fine-tune the exact height of an adhesive dispense head over a 50mm window during commissioning, ensuring the 1402 N at 0.5 MPa can overcome nozzle spring-back without re-mounting brackets.
Confirm the 50mm adjustment window covers your required 30-80mm travel range before ordering. If you need less force, stepping down to the 50mm bore drops the both-way output to 825 N at 0.5 MPa. If you require more push, moving up to the 80mm bore yields 2268 N at 0.5 MPa. If the stroke never needs tuning after setup, a fixed-stroke SED cylinder provides a simpler alternative. For direct ISO 15552 replacement, match the 80mm stroke, 50mm window, PT3/8 port, and mounting choice from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set. Note that the adjustable cushion and stop screw decelerate the load near stroke end but do not hold position on air loss; use a BSED or external rod lock for fail-safe holding.
Quick checklist
The 50mm adjustment window allows you to mechanically dial the retract end position anywhere within an effective 30-80mm stroke range. Once set, you lock the back-rod stop screw in place.
Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.