verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X85-10S

The AirTAC SEJ Adjustable Cylinder SEJ63X85-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 75–85mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke85 mm
  • Adjust window10 mm
  • Effective stroke75–85 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$117.47 $124.97Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X85-10S

The AirTAC SEJ63X85-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A back-rod stop screw lets you dial the retract end from 75mm to 85mm, perfect for fine-tuning a machine end position without swapping hardware.

This 63mm bore unit integrates a magnet for CMSE reed and DMSE electronic sensors. It features field-adjustable air cushions at both ends to manage deceleration, and uses an extruded aluminum barrel free of external tie rods. The rear rod can also carry a cam or flag for external sequencing.

Airtac SEJ Adjustable Cylinder SEJ63X85-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X85-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke85 mm
Adjustment window10 mm (75–85 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X85-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×85Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X85-10S Is Used

precision_manufacturing

Press Brake Backgauge

Dial the 75-85mm retract window to match material thickness stops precisely, leveraging the 1402 N both-way force to move heavy gauging fingers.

settings

Dispenser Changeover

Fine-tune the retract distance when switching between different adhesive bead heights, using the equal push/pull force to retract the applicator cleanly.

Is the Airtac SEJ Adjustable Cylinder SEJ63X85-10S the Right Cylinder?

Confirm the 10mm adjustment window covers your target end-position range before ordering. If you need less output, the 50mm bore provides 825 N at 0.5 MPa; if you need more, stepping up to the 80mm bore yields 2268 N both ways. If your end position never changes, a fixed-stroke SED cylinder is sufficient. For drop-safe fail-safe holding, pair this cylinder with an external BSED rod lock, as the adjustable cushion only decelerates and does not hold position on air loss. To match an ISO 15552 replacement, verify the 85mm stroke, PT3/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X85-10S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 10mm window. You can dial the effective stroke anywhere from 75mm up to 85mm, then lock it in place during commissioning.

Because the rod exits both ends, force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X85-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X85-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.