
The AirTAC SEJ Adjustable Cylinder SEJ80X100-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-10 is a double-acting, double-rod ISO 15552 profile cylinder offering a 10 mm mechanical stroke adjustment. A threaded stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 90 to 100 mm without swapping hardware.
This 80 mm bore unit features a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread. Adjustable air cushions at both ends decelerate the load near stroke end, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability. Note that this SKU lacks a magnet, so it will not trigger CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 10 mm (90–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 90-100 mm retract height when setting up stamping dies. The 3175 N both-way force at 0.7 MPa securely clamps the workpiece while the stop screw locks the final position.
Adjust the retract end by up to 10 mm to accommodate different carton sizes on a packaging line.
Fine-tune the actuator stop on a conveyor sorting system. The Ø25 mm rod handles side loads during diversion, while the adjustable end lets you perfectly match the pallet edge.
Choose this 80 mm bore if you need 2268 N of both-way force at 0.5 MPa (3175 N at 0.7 MPa) with a 10 mm fine-tuning window for your retract stop. If your application requires less force, stepping down to the 63 mm bore yields 1402 N both ways. If you need to push heavier loads, the 100 mm bore provides 3681 N. If your end position never changes, a fixed-stroke SED cylinder provides the same double-rod output more simply.
For any replacement, match the 100 mm nominal stroke, 10 mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). The mechanical stop screw and air cushions only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock or BSED variant.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can adjust the end position up to 10 mm, giving an effective stroke range of 90 to 100 mm. Once set, you lock the screw in place on the machine.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.