
The AirTAC SEJ Adjustable Cylinder SEJ80X100-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 0–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100 mm adjustable stroke window. The retract end uses a mechanical stop screw on the back rod, letting you dial the effective stroke down from 100 mm to 0 mm without changing mounting hardware.
Because the barrel is an extruded aluminum profile, it omits external tie rods for a clean exterior. The rear rod can support an external cam or flag, and the field-adjustable air cushion at both ends decelerates the 25 mm rod near stroke end. This standard SKU lacks the -S magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 100 mm (0–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 0 to 100 mm to switch a press between different material thicknesses, using the 3175 N at 0.7 MPa to clamp parts securely.
Set a precise mechanical stop on a conveyor line for varying carton lengths, locking the back-rod screw once the 2268 N at 0.5 MPa pusher is perfectly aligned.
Fine-tune the end-of-stroke contact point during equipment commissioning, adjusting the 25 mm double-rod mechanism on the fly without swapping out cylinder bodies.
Verify the 100 mm adjustment window covers your positioning range; here you can dial the retract end anywhere from 0 to 100 mm. If you need less thrust, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more power, the 100 mm bore yields 3681 N at 0.5 MPa. If your end position is fixed and never varies, a standard SED double-rod cylinder is a simpler choice.
This cylinder is dimensionally interchangeable per ISO 15552 (matching 80 mm bore, 100 mm stroke, PT3/8 port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mountings). Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate motion; they do not hold position on air loss. For fail-safe holding, specify a BSED or an external rod lock.
Quick checklist
A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke. For this 100 mm nominal stroke model, the 100 mm adjustment window allows an effective stroke range of 0 to 100 mm. You set the exact end position and lock the screw in place.
Because it is a double-rod cylinder with equal annular area on both sides, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.