
The AirTAC SEJ Adjustable Cylinder SEJ80X100-100SH is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 0–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-100SH is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced at 2268 N each way at 0.5 MPa. A stop screw on the back rod lets you dial the retract end from 0 to 100 mm, allowing one unit to cover an entire positioning range without swapping hardware.
Built for extreme heat, the FKM Viton seals push the operating temperature range up to 150 C. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the 25 mm rod near stroke end. An integrated magnet enables CMSE reed and DMSE electronic position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-100SH |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 100 mm (0–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 0-100 mm retract window to test forming depths on heated plastic sheets, leveraging the 3175 N both-way force and 150 C FKM heat resistance.
Adjust the stroke on the fly to accept different height pallets on a conveyor line, using the equal push and pull forces to securely clamp components.
Set precise impact depths for materials testing, relying on the adjustable air cushions to decelerate the 25 mm rod smoothly at the stroke ends.
This 80 mm bore provides 2268 N both ways at 0.5 MPa. If your load is lighter, the 63 mm bore delivers 1402 N; for heavier demands, the 100 mm bore offers 3681 N. The 100 mm adjustment window is ideal for prototyping or accommodating multiple part heights on one machine. If you only need a fixed end position, the SED double-rod cylinder is a simpler choice. For direct ISO 15552 replacement, match the bore, stroke, 100 mm window, PT3/8 port, FKM seal, and magnet. Note: the air cushion and stop screw decelerate and set the mechanical end but do not hold position on air loss; use an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke. For this model, you can dial the retract end up to 100 mm, giving an effective stroke range of 0 to 100 mm. You set the exact end position on the machine and lock it in.
Because it is a double-rod cylinder, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa. The H code denotes FKM Viton seals, extending the operating temperature range to 150 C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.