
The AirTAC SEJ Adjustable Cylinder SEJ80X100-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable retract stroke window. A back-rod stop screw lets you dial in the end position, yielding an effective stroke range of 90-100mm for exact machine commissioning. The extruded aluminum barrel contains no external tie rods, ensuring clean integration.
Because a rod exits both ends, the annulus area is identical in both directions. This provides an equal output force of 2268N each way at 0.5MPa. The -S magnet option enables position detection via CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 10 mm (90–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 2268N of equal both-way force at 0.5MPa for pressing pins, with the 10mm window allowing precise bottoming-out height calibration during tooling changeovers.
Holds a 25mm rod steady on both ends to resist rotation while dialing the 90-100mm stroke to match varying glass pane thicknesses exactly.
Adjusts the retract end-point on the fly to fold different carton sizes, using the 3175N retract force at 0.7MPa to cleanly crease heavy corrugated board.
Confirm the 10mm adjustment window covers your required end-position tolerance. If you need less force, the 63mm neighbor bore provides 1402N at 0.5MPa both ways; if you need more, the 100mm bore yields 3681N. For fixed-retract applications without fine-tuning, a standard SED double-rod cylinder is sufficient.
This cylinder is dimensionally interchangeable per ISO 15552 (80mm bore, 100mm stroke, PT3/8 port). Note that the adjustable air cushion at both ends only decelerates the load near stroke end; it is not a mechanical lock. For fail-safe position holding on air loss, use an external rod lock or BSED series.
Quick checklist
A stop screw on the rear protruding rod mechanically shortens the retract stroke. You can dial the end position up to 10mm, giving an effective stroke range of 90-100mm. Lock the screw after setting your desired position.
Because the rod exits both ends, force is equal in both directions: 2268N at 0.5MPa, 3175N at 0.7MPa, and a maximum of 463kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.