
The AirTAC SEJ Adjustable Cylinder SEJ80X100-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-20 is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, yielding an effective travel range of 80 to 100mm. A stop screw on the back rod lets you mechanically dial in the retract end-position during commissioning without swapping hardware. Because a rod exits both ends, the annular area is identical in both directions, delivering an equal force of 2268N each way at 0.5MPa.
This extruded aluminum barrel unit features field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length. It operates at 30-800mm/s with a PT3/8 port and a Ø25mm rod. Note that this SKU lacks a magnet (-S), so it has no position sensing, and the cushion/stop screw decelerates but does not lock the load on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 20mm retract window to set precise upper die heights during stamping changeovers, utilizing the 2268N both-way force to lift tooling consistently.
Adjust the mechanical stop on the fly to accommodate different package lengths on a packaging line, ensuring positive 3175N halting at 0.7MPa without repositioning brackets.
Fine-tune the retract position to synchronize a flighted conveyor pickup head during commissioning, matching the exact part pitch using the 80-100mm effective stroke.
Confirm the 20mm adjustment window covers your range; if you need less force, the 63mm bore delivers 1402N at 0.5MPa, while stepping up to the 100mm bore provides 3681N. If your end-position never varies, a fixed-stroke SED80X100 is sufficient. For a direct ISO 15552 replacement, match the 100mm stroke, 20mm window, PT3/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since stroke is 100mm, external guides are recommended for high side loads.
Quick checklist
A stop screw on the rear protruding rod lets you shorten the retract stroke by up to 20mm. The effective stroke range is 80 to 100mm; you lock the screw after setting your exact end-position.
Because the rod exits both ends, force is equal in both directions: 2268N at 0.5MPa, 3175N at 0.7MPa, and a maximum of 463kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.