
The AirTAC SEJ Adjustable Cylinder SEJ80X100-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring an adjustable stroke. A rod exits both ends, ensuring the annulus area and drive force remain identical in both directions. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for end-position detection.
The rear rod features a mechanical stop screw that lets you dial in the retract end over a 20 mm window. This yields an effective stroke range of 80 to 100 mm, allowing you to fine-tune the machine end position during commissioning without swapping hardware. It carries a PT3/8 port, a Ø25 mm rod, and field-adjustable air cushions at both ends to decelerate the load near the stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 2268 N of equal both-way force, this cylinder dials its stroke 80-100 mm to precisely set press die heights during changeovers without machining new spacers.
Adjust the retract stop on the fly to handle different carton lengths on a packaging conveyor, using the 20 mm window to match the exact transfer point.
Dial in the exact end-of-stroke position during initial machine commissioning, locking the back-rod stop screw once the optimal 80-100 mm travel is found.
This 80 mm bore cylinder provides 2268 N both ways at 0.5 MPa. If you need less force, the adjacent 63 mm bore offers 1402 N both ways; if you need more, step up to the 100 mm bore for 3681 N. The 20 mm adjustment window is ideal for precisely matching variable stops or part heights. If your application never requires end-position tweaking, a fixed-stroke SED double-rod cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. As a dimensionally interchangeable ISO 15552 unit, verify your bore, 100 mm stroke, PT3/8 port, and mounting setup (Basic, FA, LB, TC, FTC, TCM1, or TCM2) for a direct replacement.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The retract stroke is adjustable over a 20 mm window, giving an effective stroke range of 80 to 100 mm. You dial in the exact end position using a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.