
The AirTAC SEJ Adjustable Cylinder SEJ80X100-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-30 is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window, yielding an effective travel of 70 to 100 mm. A rod exits both ends, generating identical extend and retract forces of 2268 N at 0.5 MPa. This symmetry ensures stable momentum transfer without drifting loads.
You dial in the exact retract end-position using a stop screw on the back rod, then lock it down. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the 25 mm rod near stroke end. This SKU lacks a magnet, so it does not support position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 30 mm (70–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to match varying die heights during changeover, using the 3175 N both-way force to clamp workpieces securely.
Adjust the 70-100 mm stroke range on the fly to halt different package sizes on a conveyor without swapping hardware.
Fine-tune the exact end-position for a welding tip across a 30 mm window, leveraging equal both-way rod forces for precise electrode pressure.
Verify the 30 mm adjustment window covers your machine's positioning range. If you need less force, the 63 mm bore provides 1402 N at 0.5 MPa; stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If your end-position never changes after commissioning, a fixed-stroke SED provides the same twin-rod output more simply.
This cylinder uses a PT3/8 port and M20x1.5 rod thread. The air cushion decelerates the load but does not hold position on air loss; apply an external rod lock for fail-safe holding. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 70 to 100 mm. You set the exact end-position during commissioning and lock the screw.
Because it is a double-rod cylinder, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.