verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X100-30S

The AirTAC SEJ Adjustable Cylinder SEJ80X100-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke100 mm
  • Adjust window30 mm
  • Effective stroke70–100 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$157.02 $164.52Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X100-30S

The AirTAC SEJ80X100-30S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas and an equal force of 2268 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 30 mm window, giving an effective stroke range of 70 to 100 mm.

This extruded aluminum barrel design includes a magnet for CMSE or DMSE sensors. You can fine-tune the end position directly on the machine, then lock the stop screw. It features field-adjustable air cushions at both ends and a PT3/8 port.

Airtac SEJ Adjustable Cylinder SEJ80X100-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X100-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke100 mm
Adjustment window30 mm (70–100 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X100-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×100Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X100-30S Is Used

precision_manufacturing

Press Die Clearance

Dial the 70-100 mm retract to set exact die clearance. The 3175 N both-way force securely clamps sheet metal blanks without deflection.

swap_horiz

Packaging Changeover

Adjust the retract stop on the fly when switching carton sizes.

conveyor_belt

Pallet Stops

Fine-tune the stop position for varying pallet foot depths. The Ø25 rod resists side loading while the back rod carries a cam for sensors.

Is the Airtac SEJ Adjustable Cylinder SEJ80X100-30S the Right Cylinder?

Verify the 30 mm adjustment window covers your positioning range. If 2268 N at 0.5 MPa is excessive, step down to the 63 mm bore (1402 N). If you need more push, the 100 mm bore yields 3681 N. A fixed-stroke SED is sufficient if no on-machine dialing is required.

For fail-safe holding under air loss, add an external rod lock, as the stop screw and air cushions only set the mechanical end and decelerate near stroke end. To replace an ISO 15552 unit, match the 80 mm bore, 100 mm stroke, 30 mm window, PT3/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X100-30S FAQ

The retract end features a stop screw on the back rod that allows you to dial the stroke down by up to 30 mm. The effective stroke range is 70 to 100 mm. You set the exact end position on the machine and lock it in place.

Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X100-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X100-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.