
The AirTAC SEJ Adjustable Cylinder SEJ80X100-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 60 to 100 mm without changing hardware.
This extruded aluminum profile cylinder includes a built-in magnet for position sensing. You can fine-tune the mechanical end stop precisely on the machine, then lock it down. It features field-adjustable air cushions at both ends to decelerate the 25 mm rod near stroke limits, and PT3/8 ports.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 40 mm (60–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Adjust the mechanical stop on the fly when switching carton sizes, letting the double-rod equal-force motion push and pull folding flaps without recalibrating PLC timers.
Fine-tune the stroke window to set precise tip gaps for spot welding guns, relying on the 463 kgf maximum force to maintain consistent pressure on the workpiece.
Verify the 40 mm adjustment window covers your required end-position variance, providing a 60 to 100 mm effective range. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N both ways. If the exact end position is fixed and never changes, a standard SED double-rod cylinder is sufficient. For direct ISO 15552 replacements, match the 80 mm bore, 100 mm nominal stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; fail-safe holding requires an external rod lock.
Quick checklist
A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke by up to 40 mm. This creates an effective stroke range of 60 to 100 mm, allowing you to fine-tune the end position directly on the machine and lock it in place.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.