
The AirTAC SEJ Adjustable Cylinder SEJ80X100-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window, letting you dial the retract end from 50 to 100 mm. A rod exits both ends, making the annulus area identical for equal force and speed in both directions. Output is 2268 N each way at 0.5 MPa and 3175 N at 0.7 MPa.
You set the exact end position via a mechanical stop screw on the back rod, then lock it down for precise machine commissioning. This SKU has no magnet, so it does not support CMSE or DMSE position sensors. The extruded aluminum barrel is dimensionally interchangeable per ISO 15552, and adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 50 to 100 mm retract window to accommodate varying panel thicknesses in a stamping press, using the 2268 N both-way force to hold the tooling securely.
Fine-tune the exact package halt position on a sorting line without swapping hardware, locking the back-rod stop screw once the optimal end point is found.
Adjust the mechanical end during R&D trials to test actuation depths on different prototypes, relying on the equal both-way force for consistent test pressure.
This 50 mm adjustment window is ideal for trial positioning or matching a variable stop across different part heights. If you need less force, the adjacent 63 mm bore provides 1402 N both ways at 0.5 MPa; if you need more clamping power, step up to the 100 mm bore for 3681 N. If your end position never changes, a fixed-stroke SED cylinder is sufficient. Remember, the air cushion and stop screw only set the mechanical end and decelerate the load; they are not a brake. A plain SEJ does not hold position on air loss, so for fail-safe holding, use an external rod lock. This PT3/8 ported unit can replace any ISO 15552 cylinder matching its 100 mm stroke, 50 mm window, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
Quick checklist
The retract stroke is adjustable over a 50 mm window via a stop screw on the back rod. The effective stroke range is 50 to 100 mm, which you lock in place after finding the exact end position.
Because a rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.