
The AirTAC SEJ Adjustable Cylinder SEJ80X100-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 25–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X100-75S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding equal force in both directions—about 2268 N each way at 0.5 MPa. The 75 mm adjustment window lets you dial the effective stroke down from 100 mm to 25 mm.
The retract position is set via a stop screw on the back rod, allowing precise end-position tuning directly on the machine. The included -S magnet supports CMSE reed and DMSE electronic sensors for position feedback. Field-adjustable air cushions at both ends manage deceleration over the 36 mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X100-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 75 mm (25–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 25-100 mm clamping depth on multi-height stamping fixtures using the 3175 N both-way force.
Switch carton forming stations between box sizes by adjusting the retract stop up to 75 mm without swapping hardware.
This 80 mm bore delivers 2268 N both ways at 0.5 MPa (3175 N at 0.7 MPa). If your application needs less force, the adjacent 63 mm bore provides 1402 N both ways; if you need more, step up to the 100 mm bore for 3681 N. The 75 mm adjustment window is ideal for prototyping or matching varying part heights without machining new stops. For fixed-position tasks without changeover, a standard SED double-rod cylinder is sufficient. Note that the air cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. As an ISO 15552 cylinder, it dimensionally interchanges with any standard 80x100 unit matching the PT3/8 port and M20x1.5 rod thread.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 75 mm window. You can set the effective stroke anywhere from 25 mm up to the nominal 100 mm, then lock the screw for repeatable positioning.
Because the rod exits both ends, the annulus area is identical in both directions. The force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.