
The AirTAC SEJ Adjustable Cylinder SEJ80X150-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 110–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X150-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal drive force of 2268 N each way at 0.5 MPa, ensuring perfectly balanced push and pull kinetics. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
The -40 tail indicates the retract end can be dialed in up to 40mm via a mechanical stop screw on the back rod. This yields an effective stroke range of 110-150mm, allowing you to fine-tune the exact end position directly on the machine without swapping hardware. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors. Adjustable air cushions at both ends decelerate the 25mm rod near stroke limits, though this is not a locking brake.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X150-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 40 mm (110–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 110-150mm stroke to set exact die clearance on a 150-ton press, utilizing the 2268N both-way force at 0.5 MPa to clamp and release heavy stamping blanks securely.
Adjust the retract stop up to 40mm to accommodate different carton heights during format changeovers on a packaging line, avoiding the need to physically remount the cylinder.
Act as a multi-height pallet stopper on a conveyor; the double-rod design ensures equal 3175N halting force at 0.7 MPa in both directions while the back rod carries a rotation cam.
Verify the 40mm adjustment window covers your required end-position range. If you need less force, the adjacent 63mm bore delivers 1402 N both ways at 0.5 MPa. If scaling up, the 100mm bore provides 3681 N both ways at 0.5 MPa. If the exact stroke is fixed and never changes, a standard SED double-rod cylinder is sufficient. For matching an ISO 15552 replacement, confirm the 80mm bore, 110-150mm effective stroke, PT3/8 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that a plain SEJ does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 40mm. This gives an effective stroke range of 110-150mm. You dial the end position during commissioning and lock the screw in place.
Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.