Airtac SE80 Standard Cylinder SE80X150
The AirTAC Airtac SE80 Standard Cylinder SE80X150 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X150
The AirTAC SE80X150 is a double-acting single-rod ISO 15552 profile cylinder delivering 2513 N of push force at 0.5 MPa. Its square extruded aluminum barrel removes external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This unit features field-adjustable air cushioning at both ends to decelerate the 25 mm rod smoothly over its 150 mm stroke. This SKU ships without a magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE80 Standard Cylinder SE80X150 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X150 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X150
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X150 Is Used
Injection Mold Ejection
Provides the 2513 N push force required to eject dense plastic injection molds, utilizing the 150 mm stroke to clear the press bed safely.
Pallet Diverter Arm
Actuates a heavy-duty diverter arm on a packaging conveyor, relying on the tie-rod-free profile body to mount flush within narrow conveyor frames.
Stainless Steel Press
Drives a small assembly press for stainless steel brackets, where the adjustable air cushions absorb the shock of the 25 mm rod at high cycle rates.
Is the Airtac SE80 Standard Cylinder SE80X150 the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore sits between the 63 mm (1559 N) and 100 mm (3927 N) cylinders, allowing you to step down for lighter clamping or up for heavier press duties. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders using the PT3/8 port and M20x1.5 rod thread. Note that the adjustable end cushions only decelerate the piston near stroke end; they do not hold a load. If your process requires position holding without live air pressure, use a BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X150 FAQ
At 0.5 MPa, the SE80X150 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa.
Yes, the SE80X150 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same PT3/8 port and M20x1.5 rod thread, though this specific SKU lacks a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.