
The AirTAC SEJ Adjustable Cylinder SEJ80X150-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X150-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window, allowing you to dial the retract end from 100 to 150 mm. A rod exits both ends, yielding identical annulus areas so the output force is exactly 2268 N each way at 0.5 MPa. The retract stroke is set via a mechanical stop screw on the back rod, which you lock in place after fine-tuning the machine end position.
This 80 mm bore unit uses a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread. It carries field-adjustable air cushions at both ends to manage deceleration over the 36 mm cushion length. This SKU has no internal magnet, so it will not host CMSE or DMSE position sensors without modification. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X150-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 100-150 mm closure height on a stamping press, using the 2268 N both-way force to clamp material precisely before the hit.
Adjust the retract stop on the fly when switching carton sizes, avoiding hardware swaps while the double-rod maintains equal 3175 N clamping force at 0.7 MPa.
Fine-tune the electrode approach distance on an automated spot welder, locking the back-rod stop screw to maintain strict 80 mm bore positioning repeatability.
Confirm the 50 mm window covers your positioning range; if you need less travel, a fixed-stroke SED might suffice. For sizing both ways, stepping down to a 63 mm bore gives 1402 N at 0.5 MPa, while stepping up to a 100 mm bore yields 3681 N both ways. This cylinder delivers 2268 N at 0.5 MPa and 3175 N at 0.7 MPa. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock. Because the 150 mm stroke is under 300 mm, side-load stress is minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 50 mm window. You can set the effective stroke anywhere from 100 to 150 mm, then lock the screw to secure the end position.
Because the rod exits both ends, the force is identical in both directions. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.