
The AirTAC SEJ Adjustable Cylinder SEJ80X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X150-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. You can dial the retract end from 100 mm up to 150 mm, letting you fine-tune the exact end position on the machine without swapping hardware. A rod exits both ends, yielding identical annulus areas for equal force in both directions.
This 80 mm bore unit generates 2268 N each way at 0.5 MPa and 3175 N at 0.7 MPa. It includes a magnet for CMSE or DMSE sensors, uses a PT3/8 port, and relies on field-adjustable air cushions at both ends to decelerate the load near stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 100-150 mm clamping depth on an assembly press, using the 3175 N both-way force to securely hold parts during joining operations.
Adjust the retract stop on the fly when switching carton sizes, leveraging the 50 mm window to match new package heights without remounting the cylinder.
Fine-tune the mechanical end position during line setup, locking the back-rod stop screw once the optimal 100-150 mm motion is achieved for precise indexing.
Confirm the 50 mm window covers your positioning range; here, effective travel is 100 to 150 mm. If you need less force, the 63 mm bore delivers 1402 N at 0.5 MPa both ways. If you need more, step up to the 100 mm bore for 3681 N at 0.5 MPa. If your stop position never changes, a fixed-stroke SED is enough.
This cylinder provides ISO 15552 dimensional interchangeability for straightforward replacement using the 80 mm bore, 150 mm stroke, PT3/8 port, and magnet specs. Note that the air cushion only decelerates near stroke end; it is not a lock. The plain SEJ does not hold position on air loss, so use an external rod lock or BSED for fail-safe holding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The cylinder has a 50 mm adjustment window. You can mechanically dial the retract end to set an effective stroke anywhere from 100 mm up to the nominal 150 mm.
Because the rod exits both ends, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.