verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X160-40S

The AirTAC SEJ Adjustable Cylinder SEJ80X160-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 120–160mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke160 mm
  • Adjust window40 mm
  • Effective stroke120–160 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$176.56 $184.06Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X160-40S

The AirTAC SEJ80X160-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 2268 N each way at 0.5 MPa. You can dial the retract end from 120mm up to 160mm to hit an exact machine stop.

The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke end. This -S variant includes a magnet for CMSE reed or DMSE electronic sensors, and the rear rod provides a convenient mounting point for a cam or flag while adding torsional rigidity against side load.

Airtac SEJ Adjustable Cylinder SEJ80X160-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X160-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke160 mm
Adjustment window40 mm (120–160 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X160-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×160Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X160-40S Is Used

precision_manufacturing

Press Brake Die Changeover

Dial in the 120-160mm stroke to clamp different height dies during production changeovers, utilizing the 3175N both-way force to securely hold the tooling.

conveyor_belt

Variable Stop Positioning

Fine-tune the mechanical retract stop on a packaging conveyor to handle varying carton lengths without swapping out the entire cylinder assembly.

science

Trial Assembly Station

Use the 40mm adjustment window to test multiple engagement depths on an assembly fixture, locking the back-rod stop screw once the optimal position is found.

Is the Airtac SEJ Adjustable Cylinder SEJ80X160-40S the Right Cylinder?

Confirm the 40mm adjustment window covers your required end-position range before ordering. If you need less force, the adjacent 63mm bore delivers 1402 N both ways at 0.5 MPa; if you need more thrust, step up to the 100mm bore for 3681 N both ways. A fixed-stroke SED is sufficient if your end position never changes. Remember, the air cushion and mechanical stop screw decelerate the load and set the end point, but they do not hold position on air loss—use an external rod lock for fail-safe clamping. When replacing an ISO 15552 cylinder, match the 80mm bore, 160mm nominal stroke, PT3/8 port, and your specific mounting bracket.

AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X160-40S FAQ

The 40mm adjustment window lets you mechanically dial the retract stroke from 120mm up to 160mm. You set the exact end position using the back-rod stop screw and lock it in place during commissioning.

Because the rod exits both ends, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X160-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X160-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.