
The AirTAC SEJ Adjustable Cylinder SEJ80X175-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø80mm unit covers an effective stroke of 75–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X175-100 is a double-acting, double-rod ISO 15552 profile cylinder offering a 100 mm mechanical stroke adjustment window. This yields an effective retract range of 75 to 175 mm, letting you dial in the exact end position on the machine without swapping hardware.
This 80 mm bore unit features a Ø25 mm rod, M20x1.5 rod-end thread, and PT3/8 ports. It uses field-adjustable air cushions at both ends to manage deceleration near the stroke limits. This SKU omits the magnet option, so it does not support CMSE or DMSE position sensors. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X175-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 100 mm (75–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Use the 100 mm retract window to quickly match varying die heights during stamping press setup, utilizing the 3175 N both-way force to actuate heavy tooling.
Dial the effective stroke between 75 and 175 mm on the fly to sort different package sizes on a conveyor line without changing the cylinder mount.
Fine-tune the exact end position of a 2268 N clamping mechanism during machine commissioning, locking the back-rod stop screw once the perfect position is found.
Verify the 100 mm adjustment window covers your positioning needs, providing that 75-175 mm effective range. If you need less fine-tuning, a fixed-stroke SED might suffice. For sizing both ways: stepping down to a 63 mm bore yields 1402 N at 0.5 MPa, while stepping up to a 100 mm bore provides 3681 N. This SEJ80X175-100 outputs 2268 N at 0.5 MPa and 3175 N at 0.7 MPa.
When replacing an ISO 15552 cylinder, match the bore, stroke, port size, and mounting set. Remember that the adjustable stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock like a BSED.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100 mm window. This allows the effective stroke to be dialed from 75 mm up to the nominal 175 mm, which is ideal for fine-tuning end positions during machine commissioning.
Because it is a double-rod cylinder, the output force is identical in both directions. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.