Airtac SE80 Standard Cylinder SE80X175
The AirTAC Airtac SE80 Standard Cylinder SE80X175 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X175
The AirTAC SE80X175 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling up to a maximum output of 513 kgf at 1.0 MPa. The extruded aluminum square barrel omits external tie rods entirely, yielding a flush, corrosion-resistant housing that simplifies tooling clearance and direct mounting.
This 80 mm bore unit features a 25 mm piston rod with an M20x1.5 thread, paired with field-adjustable pneumatic cushioning at both ends to decelerate high-impact loads smoothly over its 36 mm cushion stroke. Because this specific SKU lacks the internal -S magnet, it is not equipped for direct CMSE or DMSE position sensing without modification. The integrated PT3/8 port ensures high airflow to support its 30-800 mm/s speed range.
Airtac SE80 Standard Cylinder SE80X175 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X175 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X175
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X175 Is Used
Injection Mold Platen Ejection
Provides the 2513 N push force at 0.5 MPa required to positively eject heavy molded plastic parts from a press platen over a 175 mm travel distance.
Pallet Diverting Arm
Drives a heavy-duty routing arm on a packaging conveyor, utilizing the 30-800 mm/s speed range to shift loaded pallets without hard end-stop impacts via the adjustable cushion.
Automated Crate Stacker
Lifts corrugated shipping crates in a logistics hub, where the 80 mm bore delivers the necessary lifting force and the tie-rod-free profile resists warehouse debris.
Is the Airtac SE80 Standard Cylinder SE80X175 the Right Cylinder?
Selecting the SE80X175 makes sense when your application requires substantial thrust between the 63 mm and 100 mm bore classes. Stepping down to a 63 mm bore reduces the 0.5 MPa push force to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. This 80 mm model strikes a balance, offering 3518 N of push at 0.7 MPa. To replace an existing unit, match the 175 mm stroke, PT3/8 port, and required mounting accessory. Since the stroke is under 300 mm, side-load stress on the rod bearing is moderate, though an external guide remains best practice for rigid lateral loads.
Note that the adjustable air cushioning only regulates end-of-stroke deceleration and does not function as a locking mechanism. If your machinery must hold a vertical load or maintain position safely upon loss of air pressure, this cylinder will drift, and you should integrate a BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X175 FAQ
The SE80X175 features a PT3/8 port and generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE80X175 is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing mounts matching the 80 mm bore footprint. Note that this specific SKU does not include a position-sensing magnet, so it will not trigger reed or electronic switches without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.