verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X175-30S

The AirTAC SEJ Adjustable Cylinder SEJ80X175-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 145–175mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke175 mm
  • Adjust window30 mm
  • Effective stroke145–175 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$176.56 $184.06Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X175-30S

The AirTAC SEJ80X175-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions—delivering 2268 N each way at 0.5 MPa. You can dial the retract end from 145mm up to the nominal 175mm via a stop screw on the back rod, locking it precisely once the machine end-position is set.

This 80mm bore unit uses a PT3/8 port and a Ø25mm rod with an M20x1.5 thread. The included magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. Adjustable air cushions at both ends absorb kinetic energy near stroke end, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.

Airtac SEJ Adjustable Cylinder SEJ80X175-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X175-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke175 mm
Adjustment window30 mm (145–175 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X175-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×175Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X175-30S Is Used

precision_manufacturing

Press Die Commissioning

Dial in the exact 145-175mm clamping depth on a stamping press.

swap_horiz

Packaging Changeover

Adapt a packaging line to different carton heights. Adjust the retract stroke by 30mm on the fly without swapping hardware, using the equal both-way force for reliable flap folding.

conveyor_belt

Variable Stop Positioning

Act as an adjustable stop gate on a conveyor. The 80mm bore provides 2268N at 0.5MPa to halt heavy pallets, fine-tuning the contact point within the 30mm window.

Is the Airtac SEJ Adjustable Cylinder SEJ80X175-30S the Right Cylinder?

Confirm this 30mm adjustment window covers your required end-position variance. If you need less force, the adjacent 63mm bore provides 1402 N at 0.5 MPa; if scaling up, the 100mm bore yields 3681 N at 0.5 MPa. If your application never requires position changes after commissioning, a fixed-stroke SED cylinder is sufficient. For direct ISO 15552 replacements, verify the 175mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Note that a plain SEJ does not hold position on air loss—the adjustable cushion and stop screw decelerate the load but do not function as a mechanical brake. For fail-safe holding, integrate an external rod lock. Since the stroke is under 300mm, side-load stress is manageable, but always ensure external guides support the load to prevent binding on the dual rods.

AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X175-30S FAQ

A stop screw on the rear rod mechanically limits the retract stroke. For this model, you can adjust the effective stroke anywhere from 145mm up to the nominal 175mm, covering a 30mm window. Once set, you lock the screw to maintain that exact end-position.

Because it is a double-rod cylinder, the force is identical in both directions. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and reaches a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X175-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X175-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.