
The AirTAC SEJ Adjustable Cylinder SEJ80X175-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 135–175mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X175-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal drive force of 2268 N each way at 0.5 MPa, preventing speed imbalance during retraction.
You can dial the retract end-position up to 40 mm via a stop screw on the back rod, yielding an effective stroke range of 135-175 mm. Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors for precise end-of-travel detection. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the load near the stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X175-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 175 mm |
| Adjustment window | 40 mm (135–175 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stop precisely within the 135-175mm range to match varying sheet metal bend depths, utilizing the 2268N both-way force for stable positioning.
Fine-tune the mechanical end position during machine commissioning to accommodate different carton heights, locking the back-rod stop screw once the perfect fold is set.
Adjust the stroke on the machine to clear varying pallet overhangs, relying on the equal extend and retract speeds to maintain smooth product flow.
This 80mm bore provides 2268 N both ways at 0.5 MPa. If your application requires less force, the 63mm bore offers 1402 N; for heavier loads, the 100mm bore provides 3681 N. The 40mm adjustment window is ideal for fine-tuning a 135-175mm end position during machine commissioning without swapping hardware. If you do not need on-the-fly stroke adjustment, a fixed-stroke SED cylinder is sufficient. Remember, the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your replacement matches the 80mm bore, 175mm nominal stroke, PT3/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40 mm. This gives an effective stroke range of 135-175 mm, which you can fine-tune on the machine before locking the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.