
The AirTAC SEJ Adjustable Cylinder SEJ80X200-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-20 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 2268 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring a clean profile that is dimensionally interchangeable per ISO 15552.
The -20 tail designates a 20 mm adjustment window, meaning you can dial the retract end from 180 mm up to the nominal 200 mm. A stop screw on the back rod mechanically sets this end position, which you lock after commissioning to match a machine stop precisely. It features field-adjustable air cushions at both ends to decelerate the load near stroke end, and this specific SKU lacks a magnet, meaning no CMSE or DMSE position sensing is installed.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 20 mm (180–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing the 20 mm retract window lets operators fine-tune the exact bottom dead center on a stamping press, utilizing the 2268 N both-way force to consistently form thin gauge sheet metal.
Adjusting the stroke end point on the fly allows a sorting diverter arm to accommodate varying carton heights without changing hardware, relying on equal push and pull forces for smooth actuation.
Confirm this 20 mm adjustment window covers your required end-position range; if you need more than 20 mm of travel flexibility, consider a larger -NN window option. For sizing, the neighboring 63 mm bore yields 1402 N both ways at 0.5 MPa, while stepping up to the 100 mm bore provides 3681 N. If your stroke never varies after commissioning, a fixed-stroke SED is sufficient and shorter overall. This cylinder does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, so for fail-safe holding point to a BSED or external rod lock. When replacing an ISO 15552 unit, match the 80 mm bore, 200 mm stroke, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The -20 in the model number means the retract stroke can be dialed in over a 20 mm window, giving an effective stroke range of 180 to 200 mm. A stop screw on the back rod mechanically sets the end position, which you lock down after fine-tuning the machine stop.
Because it is a double-rod cylinder, the force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.