
The AirTAC SEJ Adjustable Cylinder SEJ80X200-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 2268 N each way at 0.5 MPa. The mechanical stop screw on the back rod lets you dial in the retract end from 180mm to 200mm for precise machine commissioning without changing hardware.
This extruded aluminum barrel unit includes a magnet for CMSE reed and DMSE electronic sensors. It omits the FB, CA, CB, and CR mounts, offering only Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. The field-adjustable air cushion at both ends decelerates the load near the stroke ends but does not function as a fail-safe lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 20 mm (180–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 3175 N both ways at 0.7 MPa, this cylinder dials the exact 180-200mm press stroke for varying material thicknesses during setup.
Fine-tune the retract stop position precisely to match changing product heights on a packaging conveyor without swapping hardware.
Adjust the end-point mechanically during trial positioning sequences to find the optimal contact distance for testing components.
Confirm the 20mm adjustment window covers your required 180-200mm end-position range. If you need less force, the 63mm bore provides 1402 N at 0.5 MPa; if you need more, the 100mm bore yields 3681 N at 0.5 MPa. If your end-position never changes, a fixed-stroke SED is sufficient. For fail-safe position holding on air loss, use an external rod lock, as the adjustable cushion only sets the mechanical end.
To replace an ISO 15552 cylinder, match the 80mm bore, 200mm nominal stroke, PT3/8 port, and your specific mounting subset. The 25mm rod uses an M20x1.5 thread, and the -S magnet enables DMSE electronic position feedback.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20mm. The effective stroke range is 180-200mm, which you lock in place after setting the exact end-position.
Because the rod exits both ends, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.