
The AirTAC SEJ Adjustable Cylinder SEJ80X200-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 170–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. By turning the stop screw on the back rod, you can dial the retract end from 170 mm up to the nominal 200 mm.
This mechanism lets you fine-tune the exact end position directly on the machine during commissioning. The extruded aluminum barrel has no external tie rods, and the field-adjustable air cushions at both ends decelerate the load near stroke end without acting as a mechanical lock. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 30 mm (170–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 170 to 200 mm retract position on a stamping press to compensate for material thickness variance, applying 2268 N of consistent both-way force at 0.5 MPa.
Quickly adjust the end stop during a packaging line format change to handle different carton depths without swapping out the entire cylinder hardware.
Confirm the 30 mm adjustment window covers your required 170 to 200 mm end-position range. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If your application never requires end-position tuning, a fixed-stroke SED cylinder is sufficient.
For ISO 15552 replacement, match the 80 mm bore, 200 mm nominal stroke, PT3/8 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the plain air cushion and stop screw do not hold position on air loss; for fail-safe holding, specify an external rod lock or BSED series. At 200 mm stroke, side loads are moderate, but ensure the M20x1.5 rod thread aligns with the load to prevent binding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 170 to 200 mm. You lock the screw after setting the exact end position required on the machine.
Because the rod exits both ends, the annulus area is identical in both directions. The output force is 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.