
The AirTAC SEJ Adjustable Cylinder SEJ80X200-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 160–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-40S is a double-acting, double-rod ISO 15552 profile cylinder. A rod extends from both ends, guaranteeing identical annulus areas so output force remains equal in both directions at 2268 N each way at 0.5 MPa. The integrated -S magnet enables precise end-of-stroke detection using CMSE reed or DMSE electronic sensors.
This unit features a 40 mm adjustable stroke window, allowing you to dial the retract stop down to a 160 mm effective stroke. A mechanical stop screw on the back rod lets you fine-tune the end position during commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the motion near the stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 40 mm (160–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm retract window to perfectly fold varying carton heights, using the 2268 N both-way force to securely tuck flaps without damaging the packaging.
Fine-tune the 160-200 mm stop position during machine commissioning, matching the metal bend line precisely while the double-rod design resists rotational torque.
Adjust the stroke on the fly to press bearings or pins into different housing depths, relying on the equal 3175 N extend and retract force at 0.7 MPa for consistent insertion.
This 80 mm bore delivers 2268 N both ways at 0.5 MPa, sitting between the 63 mm bore (1402 N) and the 100 mm bore (3681 N). If your load requires less force, step down to the 63 mm; if you need more power, step up to the 100 mm. The 40 mm adjustment window is ideal for setting a precise 160-200 mm end stop to match varying part heights.
For straightforward fixed-stroke applications without end-tuning, the SED fixed double-rod cylinder is sufficient. Remember that the adjustable air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, integrate an external rod lock or BSED. When replacing an ISO 15552 cylinder, verify the PT3/8 port, M20x1.5 rod thread, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 40 mm. This creates an effective stroke range of 160 to 200 mm, which you can lock in place during commissioning to hit a precise end position.
Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.