
The AirTAC SEJ Adjustable Cylinder SEJ80X200-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 125–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X200-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This yields equal force and speed extending and retracting, delivering 2268 N each way at 0.5 MPa and 3175 N each way at 0.7 MPa.
You can dial the retract end-position up to 75 mm via a stop screw on the back rod, creating an effective stroke range of 125 to 200 mm. The back rod also provides a convenient mounting point for a cam or flag. Built to ISO 15552 dimensional standards with an extruded aluminum barrel, it uses field-adjustable air cushions at both ends to decelerate loads near stroke end. This SKU lacks a magnet, so it will not trigger CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X200-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 75 mm (125–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 125 to 200 mm to set precise die clearance during stamping press commissioning, utilizing the 3175 N both-way force for stable clamping.
Adjust the back-rod stop screw to accommodate different pallet heights on a machining center, shifting the end position up to 75 mm without changing hardware.
Fine-tune the diverting distance on a packaging conveyor line, using the equal both-way speed to ensure consistent product routing across mixed package sizes.
Verify the 75 mm adjustment window covers your machine's required end-position range, giving an effective 125 to 200 mm stroke. For sizing context: a 63 mm bore yields 1402 N both ways at 0.5 MPa, while stepping up to a 100 mm bore provides 3681 N both ways. If you only need a fixed 200 mm stroke without mechanical adjustment, a standard SED double-rod cylinder is sufficient. To replace an ISO 15552 cylinder, match the 80 mm bore, 200 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw decelerate and set ends but do not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. At 200 mm stroke, side loads are minimal, but external guides are recommended if pushing off-center loads.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 75 mm. The effective stroke range is 125 to 200 mm. You lock the screw after setting the exact end-position on the machine.
Because it is a double-rod cylinder, force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.