
The AirTAC SEJ Adjustable Cylinder SEJ80X30-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 10–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X30-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A stop screw on the back rod lets you dial in the end position over a 20 mm window, giving an effective stroke range of 10 to 30 mm for precise commissioning. The extruded aluminum barrel has no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
Because a rod exits both ends, the annular area is identical in both directions. This cylinder delivers an equal force of 2268 N each way at 0.5 MPa, and 3175 N at 0.7 MPa. It includes field-adjustable air cushions at both ends to decelerate the load near the stroke limits, and the built-in -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X30-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 20 mm (10–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the 10 to 30 mm retraction stop on a stamping press feed mechanism, using the 2268 N both-way force to push and pull material stops accurately.
Adjust the end position within the 20 mm window to match different part heights during packaging line changeovers without swapping cylinder hardware.
Dial in the exact clamping reach on a machining fixture, leveraging the equal push and pull forces to secure parts firmly before locking the stop screw.
This 80 mm bore model fits applications needing 2268 N of both-way force at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1402 N both ways; if heavier, the 100 mm bore provides 3681 N. The 20 mm adjustment window is ideal for dialing in a precise 10 to 30 mm end stop during machine commissioning. If your required position never changes after setup, a fixed-stroke SED cylinder is a simpler alternative.
For ISO 15552 replacements, verify the 30 mm nominal stroke, 20 mm adjust window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable cushion and mechanical stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED series.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke over a 20 mm window. You can dial the effective stroke from 10 mm up to 30 mm to fine-tune the end position on the machine, then lock it in place.
Because it is a double-rod cylinder, force is equal in both directions: 2268 N at 0.5 MPa and 3175 N at 0.7 MPa. The maximum force is 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.