Airtac SE80 Standard Cylinder SE80X30
The AirTAC Airtac SE80 Standard Cylinder SE80X30 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke30 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X30
The AirTAC SE80X30 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while exposing zero protruding hardware.
This specific SKU lacks the built-in magnet (-S), meaning it is not equipped for AirTAC CMSE or DMSE position sensing out of the box. To manage kinetic energy at end-of-travel, the cylinder features field-adjustable air cushions at both ends, allowing technicians to dial in deceleration via a setscrew rather than relying on a fixed rubber bumper.
Airtac SE80 Standard Cylinder SE80X30 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X30 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X30
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X30 Is Used
Injection Mold Platen Ejection
Uses the 2513 N extend force to positively eject heavy plastic parts from injection molding platens over a short 30 mm travel distance.
Metal Stamping Stripper
Acts as a pneumatic stripper in a metal stamping press, utilizing the 2268 N retract force to pull the tooling off sheet material reliably.
Bearing Press Insertion
Drives bearings into automotive housings where the 80 mm bore provides the necessary thrust without requiring full system pressure.
Is the Airtac SE80 Standard Cylinder SE80X30 the Right Cylinder?
Choosing this 80 mm bore depends on your load requirements; it provides 2513 N push at 0.5 MPa. If your application needs less force, the 63 mm bore offers 1559 N push, while stepping up to the 100 mm bore yields 3927 N push. Remember that a plain SE cylinder will drift if air pressure is lost or a valve is centered, so it cannot hold a vertical load without a pilot-operated check valve or the BSE rod-lock variant. For retrofitting, this model uses a PT3/8 port, a 25 mm rod, and standard ISO 15552 mounting dimensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X30 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X30 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint and hardware interface as other ISO 15552 profile cylinders. It uses a PT3/8 port and an M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.