
The AirTAC SEJ Adjustable Cylinder SEJ80X500-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 490–500mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X500-10 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so thrust matches retraction exactly at 2268 N each way at 0.5 MPa. The back-rod stop screw provides a 10 mm adjustment window, setting the effective stroke range from 490 to 500 mm for precise machine commissioning.
Built to ISO 15552 dimensional standards with an extruded aluminum barrel, this 80 mm bore unit runs on PT3/8 ports and a Ø25 mm rod. It lacks a piston magnet, meaning no CMSE or DMSE position sensing on this SKU. Field-adjustable air cushions at both ends decelerate the 500 mm travel, while the dual-rod design resists rotation for guided external loads.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X500-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 500 mm |
| Adjustment window | 10 mm (490–500 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 490-500 mm end position during stamping press commissioning. The 3175 N retraction force at 0.7 MPa securely pulls the tool back without drift.
Adjust the retract stop on an automated ejection arm to clear different part heights on the fly, using the equal both-way force to maintain consistent ejection pressure.
Fine-tune the 10 mm retract window to sync a 500 mm transfer stroke with varying pallet sizes on a packaging line, locking the mechanical stop once aligned.
Verify the 10 mm stop-screw window covers your fine-tuning range; the retract end locks mechanically after setting the 490-500 mm position. If 2268 N at 0.5 MPa is excessive, step down to the 63 mm bore delivering 1402 N both ways. If you need more power, the 100 mm bore provides 3681 N. For fixed-position tasks without end dialing, a standard SED cylinder suffices.
At 500 mm of travel, mount external guides to handle side loads and prevent rod binding. This SKU ships without a magnet, so external limit switches are required if position feedback is needed. The air cushion decelerates near stroke end but does not hold position on air loss; for fail-safe locking, specify an external rod lock.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. Your effective stroke range is 490 to 500 mm. You dial the end position in during machine setup, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and reaches a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.