
The AirTAC SEJ Adjustable Cylinder SEJ80X500-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 425–500mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X500-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, delivering an equal force of 2268 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke, giving an effective stroke range of 425 to 500 mm for precise machine commissioning.
This 80 mm bore unit includes a -S magnet for CMSE reed or DMSE electronic sensors and uses PT3/8 ports. It features field-adjustable air cushions at both ends to decelerate the load near the stroke end. The extruded aluminum barrel provides ISO 15552 dimensional interchangeability without external tie rods, and the dual-rod design naturally resists rotation for guided tooling.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X500-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 500 mm |
| Adjustment window | 75 mm (425–500 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 425-500mm end position during press commissioning, leveraging the 3175N both-way force to test stamping depth without swapping hardware.
Adjust the retract stop on the fly to match different carton heights, using the equal double-rod force to push and pull folding mechanisms reliably.
Confirm the 75 mm adjustment window covers your required end-position variance. If your application needs less force, the adjacent 63 mm bore delivers 1402 N both ways at 0.5 MPa; if you need more power, the 100 mm bore provides 3681 N. A fixed-stroke SED is sufficient if you do not need to dial in the retract position. For any fail-safe load holding on air loss, use a BSED or an external rod lock, as the cushion and stop screw only set the mechanical end. Because this stroke is 500 mm, add external guides to manage side loads and prevent rod binding.
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The retract end is adjustable over a 75 mm window via a stop screw on the back rod, giving an effective stroke range of 425 to 500 mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.