verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X700-75S

The AirTAC SEJ Adjustable Cylinder SEJ80X700-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 625–700mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke700 mm
  • Adjust window75 mm
  • Effective stroke625–700 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$314.75 $322.25Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X700-75S

The AirTAC SEJ80X700-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. A rod exits both ends, yielding an equal output force of 2268 N each way at 0.5 MPa. You can dial the retract end from 625 mm up to the 700 mm nominal stroke to perfectly dial in a machine's end position.

A stop screw on the back rod mechanically sets the stroke window, which you lock after positioning. The extruded aluminum barrel includes field-adjustable air cushions at both ends to tame deceleration. This -S variant carries a magnet for CMSE reed or DMSE electronic sensors.

Airtac SEJ Adjustable Cylinder SEJ80X700-75S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X700-75S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke700 mm
Adjustment window75 mm (625–700 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X700-75S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×700Nominal stroke length in mm.
-75Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X700-75S Is Used

precision_manufacturing

Automated Press Brake Stop

Dial the 625-700 mm retract window to match varying sheet metal flange depths, using the 2268 N both-way force to position the back gauge accurately.

conveyor_belt

Pallet Diverting Gate

Fine-tune the actuation end point during commissioning to align packages of different widths perfectly onto a branching roller conveyor line.

factory

Multi-Height Part Ejector

Adjust the retract stroke on the fly to push finished parts of varying heights into separate collection chutes without changing hardware.

Is the Airtac SEJ Adjustable Cylinder SEJ80X700-75S the Right Cylinder?

Confirm the 75 mm adjustment window covers your positioning range, yielding an effective 625-700 mm stroke. If you need less force, the 63 mm bore provides 1402 N both ways at 0.5 MPa; if you need more, the 100 mm bore offers 3681 N. A fixed-stroke SED is sufficient if you never need to fine-tune the end position on the fly.

For a 700 mm stroke, external guides are strongly recommended to handle side loads and prevent rod bearing wear. The adjustable air cushion only decelerates the load near stroke end; it is not a lock. This cylinder will not hold position on air loss—use an external rod lock for fail-safe holding. It is dimensionally interchangeable per ISO 15552 using the PT3/8 port, M20x1.5 rod thread, and 36 mm cushion length.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (75mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 75mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X700-75S FAQ

The 75 mm adjustment window lets you dial the effective retract stroke from 625 mm up to the 700 mm nominal length. A stop screw on the back rod sets the position, which you lock after tuning.

Because the rod exits both ends, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X700-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X700-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.